Kramer Wp562 Long Distance Hdmi Receiver

Name: Kramer Wp562 Long Distance Hdmi Receiver
Brand: KRAMER
SKU: Kramer Wp562

SKU: Kramer Wp562

Fiyatı görmek için giriş yapın

Paylaş:

Açıklama

The WP−562 is a DGKat™ twisted pair receiver for HDMI and IR signals. The WP−561 converts an HDMI and IR signal to a twisted pair signal and the WP−562 converts the twisted pair signal back to an HDMI and IR signal.

Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
HDTV Compatible.
HDCP Compliant.
Bidirectional IR Support - IR is compatible with a Kramer transmitter and via a Kramer external remote IR receiver: C−A35M/IRR or C−A35M/IRE or C−A35M/2IRE.
HDMI Support - HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD.
EDID PassThru - Passes EDID/HDCP signals from source to display.
Optional IR Emitter Cables - C−A35/IRE−10 single emitter & C−A35/2IRE−10 dual emitter.
Optional External IR Receiver Cable - C−A35M/IRR−3 and C−A35M/IRR−50.
System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC−DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC−DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC−DGKat7a23 cable.
Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer s BC−DGKat524, BC−DGKat623 and BC−DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Status LEDs - ON (red), transmit (green).
Power Connect™ System - A single connection to the transmitter powers the receiver.

INPUTS:	2 CAT 5 IN on RJ−45 connectors.
IR PORT:	Bidirectional on a 3.5mm mini jack.
MAX. DATA RATE:	4.95Gbps (1.65Gbps per graphic channel).
COMPLIANCE WITH HDMI STANDARD:	Supports HDMI and HDCP.
POWER CONSUMPTION:	5V DC, 440mA (transmitter and receiver together).
DIMENSIONS:	6.9cm x 2.88cm x 11.4cm (2.71" x 1.13" x 4.49") US; 8.6cm x 2.88cm x 8.6cm (3.39" x 1.13" x 3.39" and 8cm x 2.88cm x 8cm (3.15" x 1.13" x 3.15") EU W, D, H.
WEIGHT:	0.2kg (0.4lbs).
ACCESSORIES:	Power supply.
OPTIONS:	RK−121WP 19" rack adapter.